Various parts

If it's part of a bus for sale then post it here.
Please put buses for sale in the "Buses for Sale" section.
When something has sold please mark it AS *** SOLD ***
Post Reply

Topic Author
Rocket Ron
SSVC Member
SSVC Member
Posts: 1539
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Various parts

Post by Rocket Ron » Sat Sep 21, 2019 2:16 pm

So we have, pair of front bumper irons later style, one NOS, second as good....£35 plus postage
Heater cable and it's rotating knob, insert to body, basically to complete workings, has. Factory black knob, slight chip..£25 + po
Two rear tailgate hinges, no bends, all clean and in great condition, these fit the wide late rear tailgate.£60 plus postage.
These are complete not just one piece.
Complete except key, T tailgate handle and latch.....£40plus postage
Rechromed T Handel with key...£45 plus postage.SOLD
67 model year switch knobs, black rubber, £5 each plus postage
2 NOS rear reduction box bumpstop mounts, these are bolt on and have been known to rust..£35 plus postage
I have three 12v wiper motors, two work, one not, working are £150 each, none working as shares, £35 plus postage
For those that have Westfalia, I have three Baywindow cab curtains, enough to do a van, £150 for all..plus postage
For the 67 again, really nice distributor, one year, 1500 cc, 111-???-205 M.this was used also on the first of the bay's.£50 plus.
I have genuine boxed dizzy caps, rotors, condensors, advance/retard can for the above all NOS
I have boxes of as new factory screws, bolts...
Cab door internal opening levers, like new..these are not handles, it's what the handles attach to...!!
Late style cab door check rods....genuine £25 pair posted and very clean
Engine lid stay factory bolt and washer, these have been anodised and all parts are genuine, only one or two..
Engine door catch, fits on the engine tin, as new, genuine...£10 plus postage, again, been anodised so like new.
Late pickup front seat to bulkhead rubbers/ buffers, new..
L code 67 cab door barrels, in fact these will fit anydoor handle of the push button style.
Can I say if you need a small part, lost part, I may have it, ask.
I don't have anything large, medium anymore, would like to move what I have as I can't see me getting anymore splits this side of 70. Ha ha....
Years of working with and taking apart, breaking, acquiring parts had left me with lots or those lost bits you just can't find, I might have it, might not, cost nothing to ask.
Rocket Ron

ron@vwendangeredspecies.co.uk
Last edited by Rocket Ron on Mon Sep 30, 2019 8:19 pm, edited 3 times in total.
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


sistri
Registered user
Posts: 99
Joined: Thu Sep 12, 2013 4:53 pm

Re: Various parts

Post by sistri » Sat Sep 21, 2019 9:51 pm

Hi Ron, Interested in the 67 only distributor and two 67 only switch knobs, please send a photo to sean.stribley@cornwall.ac.uk thanks, Sean.


ShrediKnight
SSVC Member
SSVC Member
Posts: 235
Joined: Tue Jul 06, 2010 5:51 pm

Re: Various parts

Post by ShrediKnight » Sun Sep 22, 2019 6:02 pm

Hi Ron,

I'll take the
Rechromed T Handel with key...£45 plus postage.
Will Pm you now.

Thanks,

Mark


sistri
Registered user
Posts: 99
Joined: Thu Sep 12, 2013 4:53 pm

Re: Various parts

Post by sistri » Wed Sep 25, 2019 6:31 pm

Thanks for the pics Ron I'll take the 67 distributor and two 67 only knobs, let me know total inc postage and pay pal address. thanks Sean.


Robbyrob1273
Registered user
Posts: 1
Joined: Tue Sep 24, 2019 8:28 pm

Re: Various parts

Post by Robbyrob1273 » Wed Sep 25, 2019 6:52 pm

Hi Ron, do you have any pictures. I need stuff I don’t even know I need yet🙃


Topic Author
Rocket Ron
SSVC Member
SSVC Member
Posts: 1539
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Various parts

Post by Rocket Ron » Wed Sep 25, 2019 7:16 pm

Mail me....ron@vwendangeredspecies.co.uk

Ron
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


david5367
Registered user
Posts: 374
Joined: Mon Oct 20, 2014 4:55 pm

Re: Various parts

Post by david5367 » Fri Sep 27, 2019 3:35 am

What year are the internal cab door handles cheers


Topic Author
Rocket Ron
SSVC Member
SSVC Member
Posts: 1539
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Various parts

Post by Rocket Ron » Fri Sep 27, 2019 7:57 am

They are not cab door handles but the unit the cab handles attach to inside or behind the door card.

Ron
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


ShrediKnight
SSVC Member
SSVC Member
Posts: 235
Joined: Tue Jul 06, 2010 5:51 pm

Re: Various parts

Post by ShrediKnight » Mon Sep 30, 2019 7:27 pm

Hi Ron,

Just wanted to say the handles turned up today, they're lovely and very well packaged. Thank you for being so cool to deal with and definitely worth asking what else you might have!!

Many thanks,

Mark

User avatar

type21f
SSVC Member
SSVC Member
Posts: 14648
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Various parts

Post by type21f » Mon Sep 30, 2019 7:35 pm

His head will swell! I know he is a lovely pussy cat and above all a genuine geezer! There are few of us left...lol. (...see what I did there?)
He found me an unobtanium table.. he did not know what it was ...but I did!
Seriously Ron is one of a lost species ... a genuine honest guy!
G
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop


Topic Author
Rocket Ron
SSVC Member
SSVC Member
Posts: 1539
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Various parts

Post by Rocket Ron » Mon Sep 30, 2019 8:17 pm

Gush...gush...gush.....i am, I want to be and I allways will be a fair guy to deal with....why....life is to short to make enemies.

But of course......you already new that......as for Mark, joy to work with, knew, what he wanted, was prepared to pay for it and never said wow that's a lot....thanks Mark, you know where I am.
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


ShrediKnight
SSVC Member
SSVC Member
Posts: 235
Joined: Tue Jul 06, 2010 5:51 pm

Re: Various parts

Post by ShrediKnight » Tue Oct 01, 2019 10:22 pm

Cool Ron, and am sure I'll be in contact again!

Thanks,

Mark

Post Reply