Refitting Steel Wheels

Post Reply
User avatar

Topic Author
Johnnybass38
SSVC Member
SSVC Member
Posts: 67
Joined: Mon May 17, 2010 10:44 am
Location: Carmarthen

Refitting Steel Wheels

Post by Johnnybass38 » Tue May 15, 2018 11:17 am

Is there any technical reason - stud pattern, clearance etc - why I can’t refit steel wheels rather than the empi ones , presently on the bus. The front has a CE disc conversion. Thanks.
ImageImage


Sent from my iPhone using Tapatalk Pro


philsparks
SSVC Member
SSVC Member
Posts: 211
Joined: Wed May 21, 2014 7:55 pm
Location: new forset

Re: Refitting Steel Wheels

Post by philsparks » Tue May 15, 2018 11:40 am

I carry a steel wheel as a spare so as long as the stud pattern and off set is the same. Don't forget you will need different studs or nuts from what the empi wheels use.



Sent from my SM-J320FN using Tapatalk


User avatar

Topic Author
Johnnybass38
SSVC Member
SSVC Member
Posts: 67
Joined: Mon May 17, 2010 10:44 am
Location: Carmarthen

Re: Refitting Steel Wheels

Post by Johnnybass38 » Tue May 15, 2018 12:56 pm

philsparks wrote:I carry a steel wheel as a spare so as long as the stud pattern and off set is the same. Don't forget you will need different studs or nuts from what the empi wheels use.



Sent from my SM-J320FN using Tapatalk
Cheers, thanks for the advice.


Sent from my iPhone using Tapatalk Pro

Post Reply