Sump oil temperature sender

User avatar

redstar5
SSVC Member
SSVC Member
Posts: 100
Joined: Fri May 13, 2011 12:19 pm
Location: Spennymoor, Durham

Re: Sump oil temperature sender

Post by redstar5 » Mon Dec 19, 2016 1:30 pm

Can't get near mine as it's tucked up for winter but here's a couple of photos from a google search.
Attachments
IMG_2789.PNG
IMG_2788.PNG


slippy8v
Registered user
Posts: 288
Joined: Wed Aug 10, 2016 9:56 pm

Re: Sump oil temperature sender

Post by slippy8v » Mon Dec 19, 2016 5:59 pm

nice and tidy

User avatar

susta
SSVC Member
SSVC Member
Posts: 362
Joined: Tue Dec 10, 2013 10:26 pm
Location: sutton

Re: Sump oil temperature sender

Post by susta » Wed Dec 21, 2016 5:35 pm

I have a deep sump on my bus, so I drilled and tapped it at the front, no issue with maintenance or cabling problems


slippy8v
Registered user
Posts: 288
Joined: Wed Aug 10, 2016 9:56 pm

Re: Sump oil temperature sender

Post by slippy8v » Thu Dec 22, 2016 2:17 pm

Thanks to redstar9 plate arrived today very nice


Topic Author
StevieJD
SSVC Member
SSVC Member
Posts: 32
Joined: Sat Jul 09, 2016 7:51 pm

Re: Sump oil temperature sender

Post by StevieJD » Fri Dec 23, 2016 6:13 pm

Neat solution redstar5, unfortunately my engine doesn't have the blanking plate


Rich W
SSVC Member
SSVC Member
Posts: 22
Joined: Wed May 27, 2015 8:48 pm

Re: Sump oil temperature sender

Post by Rich W » Wed May 15, 2019 9:56 pm

redstar5 wrote:
Mon Dec 19, 2016 8:52 am
I did get a few spare blanking plates cut when I did mine, they are from 5mm stainless with an 8.5mm hole in the middle, I could tap them M10 if required.
PM me if you want one, I'll just need to cover the postage and packing cost
Cheers
IMG_2787.JPG
I know it's a few years ago but do you by any chance have any of these plates still available, thanks.

Post Reply