RHD 1954 Samba

Show off your pristine van, restoration, or daily driver.
Post Reply
User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Fri Feb 09, 2018 11:47 am

Thanks guys, well pleased with how they have come out, no @splitbusvanatic they are 15's mate

User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Wed Mar 14, 2018 10:13 pm

few little updates....

first off i gave all my locks to Rick at schofields and he kindly managed to get them all free'd, replace the tired springs and they are now working on one key, a small detail but so happy to be able to finally lock the bus :D

Image

Image

during the snow and cold of the last few weeks two pipes in the unit burst. I got a panicked call from the caretaker and entered the unit to see my valance and bumper nearly floating under the bus 8O

Image

Image

After sweeping out the new water feature I swapped the 90's shocking pink tinware that was on my engine ( the engine came out of my first beetle, tastefully painted peppermint green with complimentary bright pink tinware :D circa 1996 )

Despite the protests from friends who said i should keep it the tasteful tinware, the pink engine/pink bus joke wears a little thin every time you have to open you engine lid to fill up and people laugh :D :D

here's the remnants of the tinware, i'm sure there's a photo somewhere of the old engine in all its pink glory. This piece was saved from the blasters due to being scrap!

Image

somewhat more boring but a little easier on the eye satin black, I also swapped the shroud over to a 30 horse style. Note the NOS pink see thru dizzy cap bought in Hessich of all places :cheers: :cheers: thanks Gaz. ( coil attached temporarily here )

Image

the fuel tank i had in the bus since the build was borrowed, so i finally got round to modifying my own and getting it in the bus. The neck has to be cut and turned 45 degrees or so to allow for the tank to be pushed over to the left for the twin carbs.

Pete very kindly welded it back on for me!

Image

Image

freshly detailed the burners. Only took 20 mins with a scouring pad to go back over the detailed edges.

Image

few last bits tomorrow and friday and it should be back on its wheels for a test drive over the weekend and then ready for Volksworld next week :cheers:

User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Sun Mar 18, 2018 9:52 pm

Late night last thursday saw it all buttoned up and back together.

Image

Huge thanks to Gaz for helping me reset the ride height after a little fettle and adjustment of the torsion bars. The spring plates were at maximum adjustment so needed to move the splines round a click on the outer. Easy enough job just a little fiddly and nice to have a spare pair of hands to adjust each side in one go.

Image

Thursday also saw me return once again from my new favorite place my new trusty wheel polisher.

4 original deep 6's which belong to a buddy of mine and a pair of 4.5's which are mine. One of these was super curbed and has come up like new. Thanks again Cesil.

Image

Friday saw the re-installation of the door cards, sort a couple of wiring issues and a small test drive. All seems to be working just fine :cheers:

Image

I had planned to come back today ( sunday ) and put some proper miles on it, clean the interior, give it a wash and basically check over everything one last time. But then the snow, again!! :roll:

Managed to back it out of the unit, wheel spin like crazy for a few mins, use it as a snow plough and put back!

Image

Image

Image

Image

tried a few wheel options up against it and went home :D

Image

Image

Image


henk
Registered user
Posts: 250
Joined: Mon Jul 07, 2014 4:03 pm

Re: RHD 1954 Samba

Post by henk » Mon Mar 19, 2018 9:04 am

Great bus.
Leave the gasburners on it,i think they look the best on your bus.

Henk!!!

User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Mon Mar 19, 2018 2:32 pm

henk wrote:
Mon Mar 19, 2018 9:04 am
Great bus.
Leave the gasburners on it,i think they look the best on your bus.

Henk!!!
Thanks buddy i think i agree, ive just been itching for a little more dish out back. For the moment the burners are staying


Gingerporsche
Registered user
Posts: 168
Joined: Wed Aug 29, 2012 11:38 am

Re: RHD 1954 Samba

Post by Gingerporsche » Sat Nov 24, 2018 9:30 am

Hey dude! Just read the whole thread from start to finish an have too say what an amazing job all involved has done! So so cool! Unbelievable job on saving this bus and one I’d love too own 😂
Got too say i think it’s my favourite bus out their!
Keep up the good work and enjoy using it as much as possible 👌🏼
Oh and keep the burners, definitely the rite wheels for the bus 😎
Cheers wilf


vwmorten
Registered user
Posts: 2
Joined: Sun Aug 21, 2016 8:50 pm

Re: RHD 1954 Samba

Post by vwmorten » Mon Dec 24, 2018 11:03 am

Fantastic bus, fantastic work and fantastic story to read (just read it all)

Thank you!

(on the wheel dilemma: keep changing them and post pictures! :) )

User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Wed Jan 09, 2019 11:53 am

vwmorten wrote:
Mon Dec 24, 2018 11:03 am
Fantastic bus, fantastic work and fantastic story to read (just read it all)

Thank you!

(on the wheel dilemma: keep changing them and post pictures! :) )
Gingerporsche wrote:
Sat Nov 24, 2018 9:30 am
Hey dude! Just read the whole thread from start to finish an have too say what an amazing job all involved has done! So so cool! Unbelievable job on saving this bus and one I’d love too own 😂
Got too say i think it’s my favourite bus out their!
Keep up the good work and enjoy using it as much as possible 👌🏼
Oh and keep the burners, definitely the rite wheels for the bus 😎
Cheers wilf
Thanks for the kind words guys! been a bit quiet of late but rest assured its still being used and loved. Burners are still on :D


bowie
SSVC Member
SSVC Member
Posts: 291
Joined: Sat Jul 15, 2017 3:57 pm

Re: RHD 1954 Samba

Post by bowie » Wed Jan 09, 2019 1:50 pm

Fantastic bus, like the stance. What size tyres have you fitted.

User avatar

Topic Author
kilgore
Registered user
Posts: 1237
Joined: Thu Oct 13, 2005 8:33 pm
Location: sunny Birmmingham

Re: RHD 1954 Samba

Post by kilgore » Thu Jan 10, 2019 10:40 am

bowie wrote:
Wed Jan 09, 2019 1:50 pm
Fantastic bus, like the stance. What size tyres have you fitted.
thanks dude, fronts are 165/50 and rears 185/65


lg400
Registered user
Posts: 1
Joined: Sun Jan 20, 2019 8:57 pm

Re: RHD 1954 Samba

Post by lg400 » Mon Jan 21, 2019 9:25 pm

What a slammed, cool Bus...
Do you ever had problems with the straight axles, because your bus is so slammed.
This is my Bus and it's just a little bit higher than your bus. I want to put it down for another
centimeter, but I am afraid of my straight axles.
Do you have a gear box raise ?
Attachments
WP_20181020_17_06_16_Pro.jpg
WP_20181010_18_11_19_Pro.jpg

Post Reply