Wanted - Stock 1500cc distributor

Post Reply

Topic Author
mountainbus
Registered user
Posts: 121
Joined: Mon May 18, 2009 11:15 am

Wanted - Stock 1500cc distributor

Post by mountainbus » Sat Aug 31, 2019 7:01 am

I'm looking for a stock distributor as fitted to 66/67 1500 engine. Part number 131 905 205

User avatar

Banger
SSVC Member
SSVC Member
Posts: 226
Joined: Tue Jul 19, 2011 6:52 pm
Location: Lincolnshire

Re: Wanted - Stock 1500cc distributor

Post by Banger » Mon Sep 02, 2019 5:55 pm

Slough/Bracknell would probably be your best bet, although you could use a 113-905-205K. Timing is the same at 7.5 degs BTDC. Assuming you are using a Solex 30 pict 1 with the "power jet"?


Rocket Ron
SSVC Member
SSVC Member
Posts: 1548
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Wanted - Stock 1500cc distributor

Post by Rocket Ron » Tue Sep 03, 2019 12:16 pm

If you want a stock dizzy then you'll need NOS cap, rotor arm and condenser ....."..................maybe..
I'll check to see if I have that number..

Ron
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


Topic Author
mountainbus
Registered user
Posts: 121
Joined: Mon May 18, 2009 11:15 am

Re: Wanted - Stock 1500cc distributor

Post by mountainbus » Wed Sep 04, 2019 8:42 am

Can't get out to shows or swapmeets unfortunately, so Rocket Ron, if you could check if you have one I would appreciate it.


welldoneade
Registered user
Posts: 69
Joined: Sat Jan 10, 2009 12:33 pm
Location: Bromley, Kent

Re: Wanted - Stock 1500cc distributor

Post by welldoneade » Thu Sep 05, 2019 12:13 pm

Hi,
I have a 111-905-205 M which apparently was used on Feb’64 - ‘67 beetle and bus engines if you’re interested.
I’m fairly sure this came off the 1500 that was in my old ‘65 bus.
Attachments
image.jpg


Rocket Ron
SSVC Member
SSVC Member
Posts: 1548
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Wanted - Stock 1500cc distributor

Post by Rocket Ron » Thu Sep 05, 2019 4:27 pm

I've mailed him with the correct one but no reply.....

Ron
Sometimes when you have set the benchmark, the only one you have to beat is yourself !


Topic Author
mountainbus
Registered user
Posts: 121
Joined: Mon May 18, 2009 11:15 am

Re: Wanted - Stock 1500cc distributor

Post by mountainbus » Fri Sep 06, 2019 6:33 am

Pm's sent to rocket ron and welldoneade. Maybe I didn't send them correctly, so let me know on here if thats the case


Topic Author
mountainbus
Registered user
Posts: 121
Joined: Mon May 18, 2009 11:15 am

Re: Wanted - Stock 1500cc distributor

Post by mountainbus » Wed Sep 11, 2019 5:26 am

Sorted. Thanks rocket ron & welldoneade


Rocket Ron
SSVC Member
SSVC Member
Posts: 1548
Joined: Fri Jun 06, 2003 7:55 pm
Location: wiltshire

Re: Wanted - Stock 1500cc distributor

Post by Rocket Ron » Wed Sep 11, 2019 6:24 am

Will get this in the post, if there are any other small bits you need I'm here to help.
Cheers Dave

Ron
Sometimes when you have set the benchmark, the only one you have to beat is yourself !

Post Reply