Recommendations on ECU for a turbo engine

Post Reply
ricvw
SSVC Member
SSVC Member
Posts: 518
Joined: Sun Aug 19, 2007 6:17 pm

Recommendations on ECU for a turbo engine

Post by ricvw »

If you were going to fit efi turbo to 2.1 engine which would you fit? I would be after something Which was as close to fit and set up and forget if there is such a thing, the engine currently has a old CB efi with dials in the cab which are glued in place any recommendations greatly revived.

User avatar
vwJim
SSVC Committee Member
SSVC Committee Member
Posts: 20114
Joined: Thu Apr 24, 2003 6:05 pm
Location: under a bus in Hampshire...
Contact:

Re: Recommendations on ECU for a turbo engine

Post by vwJim »

I recommend you fine your nearest rolling road that you trust, and ask them.

Mappers can be funny about what systems they will touch, and you need one they'll help you with.

At the end of the day, most ECU's will do the job, but it's better you don't have to travel 100's miles to get it on the rollers.

I've used DTA / OMEX / CB numerous times. I own DTA and OMEX ECU's. Jen's has DTA.

The newer CB are better at self learning than the old system.

Most systems run in closed loop if you set them up that way, but need setting up first
Supplying quality in house designed items plus parts from SyncLink, Kennedy Clutches, & CB Performance. Also fitting service including modifications & mechanical upgrades.

flatbeat
SSVC Member
SSVC Member
Posts: 1894
Joined: Thu Oct 04, 2007 4:06 pm
Location: Gloucester

Re: Recommendations on ECU for a turbo engine

Post by flatbeat »

Have a word with Paul at VWSpeedshop.....
Packed a few belongings and headed out to Pirates Cove. In my buddy’s old grey Kombi we rolled until the gas got low.....

1965 11 Window aka 'Rustina'.
1961 Beetle.

ricvw
SSVC Member
SSVC Member
Posts: 518
Joined: Sun Aug 19, 2007 6:17 pm

Re: Recommendations on ECU for a turbo engine

Post by ricvw »

Dose any one have a recommendation on a rolling road near Manchester

Post Reply