Sump oil temperature sender

User avatar

redstar5
SSVC Member
SSVC Member
Posts: 100
Joined: Fri May 13, 2011 12:19 pm
Location: Spennymoor, Durham

Re: Sump oil temperature sender

Post by redstar5 » Mon Dec 19, 2016 1:30 pm

Can't get near mine as it's tucked up for winter but here's a couple of photos from a google search.
Attachments
IMG_2789.PNG
IMG_2788.PNG


slippy8v
Registered user
Posts: 329
Joined: Wed Aug 10, 2016 9:56 pm

Re: Sump oil temperature sender

Post by slippy8v » Mon Dec 19, 2016 5:59 pm

nice and tidy

User avatar

susta
SSVC Member
SSVC Member
Posts: 362
Joined: Tue Dec 10, 2013 10:26 pm
Location: sutton

Re: Sump oil temperature sender

Post by susta » Wed Dec 21, 2016 5:35 pm

I have a deep sump on my bus, so I drilled and tapped it at the front, no issue with maintenance or cabling problems


slippy8v
Registered user
Posts: 329
Joined: Wed Aug 10, 2016 9:56 pm

Re: Sump oil temperature sender

Post by slippy8v » Thu Dec 22, 2016 2:17 pm

Thanks to redstar9 plate arrived today very nice


Topic Author
StevieJD
SSVC Member
SSVC Member
Posts: 32
Joined: Sat Jul 09, 2016 7:51 pm

Re: Sump oil temperature sender

Post by StevieJD » Fri Dec 23, 2016 6:13 pm

Neat solution redstar5, unfortunately my engine doesn't have the blanking plate


Rich W
SSVC Member
SSVC Member
Posts: 24
Joined: Wed May 27, 2015 8:48 pm

Re: Sump oil temperature sender

Post by Rich W » Wed May 15, 2019 9:56 pm

redstar5 wrote:
Mon Dec 19, 2016 8:52 am
I did get a few spare blanking plates cut when I did mine, they are from 5mm stainless with an 8.5mm hole in the middle, I could tap them M10 if required.
PM me if you want one, I'll just need to cover the postage and packing cost
Cheers
IMG_2787.JPG
I know it's a few years ago but do you by any chance have any of these plates still available, thanks.


JonnyCJ
SSVC Member
SSVC Member
Posts: 3059
Joined: Thu Mar 14, 2013 6:50 pm
Location: Heswall

Re: Sump oil temperature sender

Post by JonnyCJ » Thu May 23, 2019 8:05 pm

I have a thermocouple attached to my dipstick which then goes into sump. Can’t think of a better way to do it.

Involved a bit of drilling dremelling on the dipstick but works really well.

I’m using one of the dual aircraft certified gauges that VWJim sells http://www.vwjim.co.uk/ourshop/prod_123 ... Gauge.html


flatbeat
SSVC Member
SSVC Member
Posts: 1894
Joined: Thu Oct 04, 2007 4:06 pm
Location: Gloucester

Re: Sump oil temperature sender

Post by flatbeat » Mon May 27, 2019 5:43 pm

JonnyCJ wrote:
Thu May 23, 2019 8:05 pm


I’m using one of the dual aircraft certified gauges that VWJim sells http://www.vwjim.co.uk/ourshop/prod_123 ... Gauge.html

What make are they? Can’t see a makers name or brand.
Packed a few belongings and headed out to Pirates Cove. In my buddy’s old grey Kombi we rolled until the gas got low.....

1965 11 Window aka 'Rustina'.
1961 Beetle.


JonnyCJ
SSVC Member
SSVC Member
Posts: 3059
Joined: Thu Mar 14, 2013 6:50 pm
Location: Heswall

Re: Sump oil temperature sender

Post by JonnyCJ » Thu Jun 06, 2019 7:33 pm

Westach - got a spare dual oil pressure/temp gauge knocking around somewhere in the workshop. Will need a thermocouple which is available from Jim or Westach, but if you want it PM me and we can work something out.

Cheers

Jonny

Post Reply