Show off your pristine van, restoration, or daily driver.
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Wed Aug 20, 2014 7:06 pm
Last edited by
craig_rose on Tue Jul 21, 2015 6:23 am, edited 1 time in total.
Time to get the welder out again
-
pipvan
- SSVC Member

- Posts: 295
- Joined: Tue Oct 14, 2008 5:06 pm
Post
by pipvan » Thu Aug 21, 2014 6:40 am
-
Sooty
- SSVC Member

- Posts: 10076
- Joined: Sun Dec 09, 2007 10:08 pm
- Location: Upt Norfff........ Bingley.
Post
by Sooty » Thu Aug 21, 2014 8:48 am
I'd know what I'd like to see with it, just because of how cool it looks in its present state!
Good purchase and we hope your new ride and projects thread will be constantly updated.
Hated your Bay Westy? I loved mine!
'NEVER SACRIFICE WHO YOU ARE JUST BECAUSE SOMEONE HAS A PROBLEM WITH IT'
SPLITLESS...
The last 5 years!
viewtopic.php?f=8&t=44037
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Thu Aug 21, 2014 2:03 pm
my main idea is to weld the bottom 6 inch's, slam it a bit and then roll it for a while, but the mrs prob has different ideas so you never know at the moment
Time to get the welder out again
-
Hongkongphooey
- SSVC Member

- Posts: 565
- Joined: Wed Dec 15, 2010 11:39 am
- Location: West Sussex
Post
by Hongkongphooey » Thu Aug 21, 2014 2:38 pm
craig_rose wrote:my main idea is to weld the bottom 6 inch's, slam it to the floor and then roll it for a while, but the mrs prob has different ideas so you never know at the moment
Slam it a bit??
FTFY.

'60 RHD Devon
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Thu Aug 21, 2014 4:31 pm
You must've seen my 68 bay

oOK I meant slam it a lot
Time to get the welder out again
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Thu Aug 21, 2014 6:20 pm
Time to get the welder out again
-
Sooty
- SSVC Member

- Posts: 10076
- Joined: Sun Dec 09, 2007 10:08 pm
- Location: Upt Norfff........ Bingley.
Post
by Sooty » Thu Aug 21, 2014 8:10 pm

not the one I was thinking of!
'NEVER SACRIFICE WHO YOU ARE JUST BECAUSE SOMEONE HAS A PROBLEM WITH IT'
SPLITLESS...
The last 5 years!
viewtopic.php?f=8&t=44037
-
VwVanDude
- SSVC Member

- Posts: 398
- Joined: Sun Sep 18, 2005 4:55 pm
Post
by VwVanDude » Thu Sep 25, 2014 8:01 pm
Hey Craig, love this bus.........very nearly bought it myself...........!
Last edited by
VwVanDude on Sat Oct 18, 2014 9:32 pm, edited 2 times in total.
07' swb Transporter Panel Van
59' Beetle
58' Electronic equipment Panel Van
54' 11 window Barn Door
A man can never have too many VW's
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Thu Sep 25, 2014 8:12 pm
Thanks Michael will up date thread with photos at weekend I've stripped all cargo area back to the chassis rails and repaired chassis at front both sides, going to start at the back tomorrow evening, ordered a load of panels from the lovely rick at Scofield's so I'm cracking on
Time to get the welder out again
-
busben
- Registered user
- Posts: 591
- Joined: Tue Oct 07, 2008 11:33 am
Post
by busben » Fri Sep 26, 2014 8:31 am
VwVanDude wrote:Hey Craig, love this bus.........very nearly bought it myself...........!!!!
Craig was a step ahead of you by actually contacting me about it
Thanks for all the updates Craig. Sounds like you're flying! Now get some pictures up and share with everyone dude!!

-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Fri Sep 26, 2014 2:07 pm
busben wrote:VwVanDude wrote:Hey Craig, love this bus.........very nearly bought it myself...........!!!!
Craig was a step ahead of you by actually contacting me about it
Thanks for all the updates Craig. Sounds like you're flying! Now get some pictures up and share with everyone dude!!

thanks ben it was nice to meet you and you and part with my hard earned cash

and you have been a very good help with info and parts sourcing a top bloke to deal with!

Time to get the welder out again
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Sat Sep 27, 2014 11:56 am
Time to get the welder out again
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Sat Sep 27, 2014 4:04 pm
Time to get the welder out again
-
craig_rose
- SSVC Member

- Posts: 402
- Joined: Sat Feb 01, 2014 6:51 pm
- Location: sunny slough
Post
by craig_rose » Sat Sep 27, 2014 4:05 pm
Time to get the welder out again