AWD 964/911 Bus

[john&hannah]

Got the old door check mount and spring into the new door frame and trimmed the frame aperture to fit (can't be that hard to cut this hole during manufacture, just a thought KlassicFab!)

Door check by Duke of Boots1966, on Flickr

Door check by Duke of Boots1966, on Flickr

All done

Door check by Duke of Boots1966, on Flickr

[type21f]

Earlier buses did not have door checkers. Klassicfab panels you have are for earlier models. Hence no fiitings/ apertures etc in your A posts and doors. Others have retro fitted checkers to early buses as you have.

[john&hannah]

Indeed they do BUT KlassicFab market their doors like this -

Screen Shot 2020-06-18 at 13.17.07.png (115.55 KiB) Viewed 782 times

.....and I ordered the one on the right 63/67 so was rather expecting a door check hole.

Never mind, least of my build worries.

[type21f]

I have the personal mail of the owner if you want to moan. But he is really FIERY.. great sport.
Looks like one hand early one hand late..

[john&hannah]

Both handed the same I just put an early left next to a late right as that’s how they were on the website and an easy screen grab. The later rh and lh both come without the check holes and the pressing flanges are not the same either, will post photos later, so if you are a perfectionist then you may be disappointed.

[john&hannah]

Some dash work today -

Dash it by Duke of Boots1966, on Flickr

Dash it by Duke of Boots1966, on Flickr

Dash it by Duke of Boots1966, on Flickr

Dash it by Duke of Boots1966, on Flickr

[john&hannah]

Some more progress including my new invention the Split Screen Airfix kit

If Airfix did splittys by Duke of Boots1966, on Flickr

[john&hannah]

Chassis back from the spray shop and the torques has been lengthened by 140mm and fits like a glove.

Chassis and Suspension by Duke of Boots1966, on Flickr

Chassis and Suspension by Duke of Boots1966, on Flickr

Chassis and Suspension by Duke of Boots1966, on Flickr

Front trans in with extended torque tube -

Chassis and Suspension by Duke of Boots1966, on Flickr

some great fabrication by the Somerset boys in Henstridge

Chassis and Suspension by Duke of Boots1966, on Flickr

Chassis and Suspension by Duke of Boots1966, on Flickr

[john&hannah]

New Shiny stuff for the rear suspension -

Shiny stuff by Duke of Boots1966, on Flickr

[john&hannah]

Cutting the bench seat extension (not sure thats the right description) of the old tool chest and onto the new one. I ordered a new tool chest panel and it did not come with this extension but i now know heritage parts centre do one - https://www.heritagepartscentre.com/uk/ ... l-box.html

Bench seat extension by Duke of Boots1966, on Flickr

Bench seat extension by Duke of Boots1966, on Flickr

Bench seat extension by Duke of Boots1966, on Flickr

Bench seat extension by Duke of Boots1966, on Flickr

[john&hannah]

Backwards and forwards controls will go about here i think - version 1

Gear shift mount mk1 by Duke of Boots1966, on Flickr

Gear shift mount mk1 by Duke of Boots1966, on Flickr

Will use the gear change from the Porsche 964 and extend the gear shift rod. if that fails then its over to this system and more £££££££

[john&hannah]

Shiny sub frame back from powder coating -

Shiny stuff II by Duke of Boots1966, on Flickr

Shiny stuff II by Duke of Boots1966, on Flickr

Shiny stuff II by Duke of Boots1966, on Flickr

[john&hannah]

The gear change set up is proving challenging and have resorted to a 1904 period wooden set up -

Circa 1904 wooden gear shift option by Duke of Boots1966, on Flickr

Front mount on back of front panel

Circa 1904 wooden gear shift option by Duke of Boots1966, on Flickr

Looking backwards under the tool chest as the gear change rod just misses the front drive shaft

Circa 1904 wooden gear shift option by Duke of Boots1966, on Flickr

Circa 1904 wooden gear shift option by Duke of Boots1966, on Flickr

Circa 1904 wooden gear shift option by Duke of Boots1966, on Flickr

[john&hannah]

New wheel bearing pushed into the newly powder coated 996 hubs

Bearing up to the pressure by Duke of Boots1966, on Flickr

[john&hannah]

Safety first - seat belt mounts fitted to b pillar -

Seat belt anchor by Duke of Boots1966, on Flickr

Seat belt anchor by Duke of Boots1966, on Flickr