Heat exchanger cable fitment

Post Reply

Topic Author
Iranu148
Registered user
Posts: 12
Joined: Wed Sep 07, 2016 1:05 pm

Heat exchanger cable fitment

Post by Iranu148 » Wed Mar 27, 2019 7:54 pm

I'm just about to fit a new heater cable. I've cleaned the tubes and stripped the heater control knob assembly. The manual says the longer cable goes in the right hand guide tube, but doesn't state if that's looking from the rear of van to front or vice versa. Any help appreciated, ta.


Wigsplitta
Registered user
Posts: 33
Joined: Tue Aug 29, 2017 7:22 pm

Re: Heat exchanger cable fitment

Post by Wigsplitta » Wed Mar 27, 2019 9:08 pm

Down the right hand tube when you're sat in the van facing forward... the offside. I think the reason is cylinders 1 and 2 sit slightly further back on the block, as does the HE.

User avatar

clymoj
Registered user
Posts: 1355
Joined: Tue Mar 27, 2012 12:10 pm
Location: London & Birmingham

Re: Heat exchanger cable fitment

Post by clymoj » Fri Mar 29, 2019 4:15 am

I can’t remember off the top of my head but as said above if you look at the staggering if your cylinders and heat exchangers it will make sense - one side is slightly further forward


Sent from my iPhone using Tapatalk
Image

Post Reply