How do people deal with/fix stripped sump bolt threads?


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Wed Oct 24, 2018 7:58 pm

Hi all,
been watching oil drip while my bus is standing cold and it appears to be coming though alongside two of the six sump bolts (the little 10mm ones with the brass washers). How can I fix this? The bolts are only supposed to be torqued up lightly but on these two bolts in particular it seems that it won't tighten at all so the thread must be worn and I don't want to strip them and make them worse.
Any tips to fix this issue gratefully appreciated!
Thanks,
DD
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------

User avatar

richandsue
SSVC Member
SSVC Member
Posts: 454
Joined: Tue Mar 31, 2009 8:52 pm
Location: Nottingham

Re: How do people deal with/fix stripped sump bolt threads?

Post by richandsue » Wed Oct 24, 2018 8:08 pm

will need a Heli coil or time sert fitting to the stripped threads. prefer time serts myself.


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

Re: How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Thu Oct 25, 2018 9:32 am

Forgive my ignorance but what's a time sert?
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------

User avatar

8 8US
SSVC Member
SSVC Member
Posts: 2597
Joined: Tue Jul 17, 2012 8:31 pm
Location: Wolverhampton

Re: How do people deal with/fix stripped sump bolt threads?

Post by 8 8US » Thu Oct 25, 2018 11:56 am

Dave

Here they are:-

https://eshop.wurth.co.uk/Product-categ ... en/GB/GBP/

I've used them for engine studs.

Can you not try some loctite on it?
Richard

1960 Single Cab Pickup “Barny” (resto thread - https://www.ssvc.org.uk/phpbb/viewtopic ... 8&t=122082)
1966 Devon “Hetty”

1980 Brasilia gone :(


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

Re: How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Thu Oct 25, 2018 8:33 pm

Cheers guys, I'll give it a go!
DD
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------


lids_2001
SSVC Member
SSVC Member
Posts: 283
Joined: Sat Dec 10, 2005 7:09 pm
Location: Enfield, North London

Re: How do people deal with/fix stripped sump bolt threads?

Post by lids_2001 » Thu Oct 25, 2018 10:51 pm

i have threaded a bolt from the inside before and used standard nuts from underneath with some sealant in the past
Image

Tourist exchange with optional extra of a rubber mat!

User avatar

Dougie
SSVC Committee Member
SSVC Committee Member
Posts: 833
Joined: Tue Feb 21, 2006 8:31 am
Location: Redditch

Re: How do people deal with/fix stripped sump bolt threads?

Post by Dougie » Fri Oct 26, 2018 3:29 am

The studs are available from most of the usual suppliers, if it's the stud rather than the case that's suffered with age then it's an easy replacement next time you change the oil.
SSVC Club President
SSVC Committee - Membership Secretary

User avatar

Who.Me?
SSVC Member
SSVC Member
Posts: 994
Joined: Thu May 15, 2014 8:13 pm
Location: West Sussex

Re: How do people deal with/fix stripped sump bolt threads?

Post by Who.Me? » Fri Oct 26, 2018 10:01 am


User avatar

BJ1
SSVC Member
SSVC Member
Posts: 3487
Joined: Thu Aug 30, 2007 8:12 pm
Location: Sunny Devon

Re: How do people deal with/fix stripped sump bolt threads?

Post by BJ1 » Sun Oct 28, 2018 4:20 pm

WHS ^^^^^^ This is the easiest fix. Simply tap the case holes to M8 and fit the stepped studs. Stronger than helicoils etc. but don't overtighten them!
1966 Westy in Velvet Green - being restored
1967 Devon from Devon still in Devon
1967 Sundial from Idaho
1971 Westfalia from LA
1971 patina Delux from Montana now living in Germany
1972 Devon now owned by No 1 son!


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

Re: How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Sun Oct 28, 2018 8:26 pm

cheers guys!
Wish me luck lol
DD
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------


unclegee
SSVC Member
SSVC Member
Posts: 583
Joined: Sat Mar 02, 2013 10:11 pm

Re: How do people deal with/fix stripped sump bolt threads?

Post by unclegee » Tue Oct 30, 2018 6:25 pm

Hiya Dave

With BJ1 on this one, it's how I got around worn threads - part no. N0144781SS from VW Heritage. Don't forget to pre-drill to 6.8mm before tapping out to M8 though!

Good luck mate,
All the best, Grant


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

Re: How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Tue Oct 30, 2018 9:32 pm

Hi Grant,
cheers for the info!
I bet you don't get this problem in the Zafira lol
See ya
DD
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------


unclegee
SSVC Member
SSVC Member
Posts: 583
Joined: Sat Mar 02, 2013 10:11 pm

Re: How do people deal with/fix stripped sump bolt threads?

Post by unclegee » Wed Oct 31, 2018 9:33 am

:lol: :lol: :lol: :lol:
No way, that thing goes into a laboratory where its fixed by a robot with a computer!!!

User avatar

e m p i
Registered user
Posts: 5514
Joined: Fri Jan 28, 2005 3:51 pm
Location: Essex but I'm nothing like the twats on the telly.
Contact:

Re: How do people deal with/fix stripped sump bolt threads?

Post by e m p i » Sat Nov 03, 2018 11:17 pm

Are the threads on the studs stripped so the nuts won’t do up or are the threads in the block stripped so the stud is pulling from the block? If it’s just the threads on the studs then just pull the stud out with some grips and put a new stud in as that’s better than drilling the block out if you don’t have to.
"...scum is scum wherever you go" D.C.I. Gene Hunt

0.018 reaction time:Empster July 2005 with a timing slip to prove it
Sooty wrote: You are a god Lee. :cheers:


Topic Author
Doka Dave
SSVC Member
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am

Re: How do people deal with/fix stripped sump bolt threads?

Post by Doka Dave » Sun Nov 04, 2018 4:44 pm

It's not studs Lee, it's just bolts. The bottom of the sump has six holes, not six studs if you know I mean.
When I go to tighten 2 of the six bolts in order to secure the sump plate on, they just spin with a bit of friction, not tighten. And this is where the oil is leaking past those threads.
Pain in the *** anyway!
Cheers,
DD
--------------------------
Member since 1996.

Official SSVC Quizmaster 2014-2018 :) :) :) :)
-------------------------

Post Reply