65 panel beam adjusters

Post Reply

Topic Author
smudger73
Registered user
Posts: 84
Joined: Sun Jul 16, 2017 10:00 am

65 panel beam adjusters

Post by smudger73 » Fri Jun 15, 2018 7:26 pm

Hi folks, bought a 65 standard front beam and fitted adjusters, do i need to cut off the beam bump stops to lower it? I have a fitted a sa set up on the rear and started to lower the front to match the height but now about to hit the bump stops
20180106_145946.jpg

User avatar

vwJim
SSVC Committee Member
SSVC Committee Member
Posts: 19391
Joined: Thu Apr 24, 2003 6:05 pm
Location: under a bus in Hampshire...
Contact:

Re: 65 panel beam adjusters

Post by vwJim » Fri Jun 15, 2018 7:56 pm

Better to fit dropped spindles. You'll have better ride quality and you can retain the bump stops.
Supplying quality in house designed items plus parts from SyncLink, Kennedy Clutches, & CB Performance. Also fitting service including modifications & mechanical upgrades.


Topic Author
smudger73
Registered user
Posts: 84
Joined: Sun Jul 16, 2017 10:00 am

Re: 65 panel beam adjusters

Post by smudger73 » Fri Jun 15, 2018 8:45 pm

Cheers jim

Post Reply