Dormobile interior edge trim - where to get?

So you Devon perverts, it's finally here - the Devon specific forum - and it's in a whole new interiors section :-)
type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

Well at the risk of boring you all I thought I would post pictures of my 65 Caravette Pop top opening trim Sorry but some may be twice....



Image



Image



Image


Image


Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image

Image




I have a set of Dormobile trim to fit

Image


from another Dormobile..






I have found not found a suitable alternative so far...

OG Dormobile strip that was fitted has a hockey stick profile and no one makes it.. like this...

The curved pieces have a rib removed and have then been heated and bent round a former..

I can fit some 4cm wide foam filled PVC finisher but it is square edged and plain...I may then use vinyl headlining material to cover it to match the headlining and some ivory P wing beading between the PVC finisher and headlining to act as a bump strip so if you stand up suddehly your flesh does not impact in a sharp edge....

Still looking though...

AFAIK Domobile no longer use this and have no finisher..

We could get some extruded! LOL

Will post a picture of my solution.
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

MarkFer
SSVC Member
SSVC Member
Posts: 769
Joined: Wed May 14, 2008 12:53 pm
Location: Hampshire

Re: Dormobile interior edge trim - where to get?

Post by MarkFer »

John TC wrote:A friend his having a new roof fitted to his bus on the 20th of this month,
I will get an answer for you if you haven't heard anything by then.
Excellent!

MarkFer
SSVC Member
SSVC Member
Posts: 769
Joined: Wed May 14, 2008 12:53 pm
Location: Hampshire

Re: Dormobile interior edge trim - where to get?

Post by MarkFer »

Graham - what are the dimensions of the og hockey stick section?

Mark.,

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

I will post some pictures..
LOL
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

With a rule...showing depths etc..

Image



Image



Image




Image



Image




Image



Image



Image




The long side pieces I have has some of the inner profile lip broken off at the very ends..
The curved pieces have this inner profile lip removed.
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

MarkFer
SSVC Member
SSVC Member
Posts: 769
Joined: Wed May 14, 2008 12:53 pm
Location: Hampshire

Re: Dormobile interior edge trim - where to get?

Post by MarkFer »

Thanks Graham. I hadn't realised until these photos that the x-section is more like an F-section really. And I did wonder what you meant on an earlier post when you said the curved lengths have the 2nd lip removed! Is the "socket" in the F-section used for anything? Is something sliped into the gap? Or would a true hockey shaped extrusion do the same job?

Mark.

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

My approach was to look for this as the best possibly available alternative...because this protects the sharp edge..
A flat section profile with a curved edge being an alternative with a piece of wing style p beading slipped in betweek might disguise the mismatch between a wavy edge and the hard straight edge of the profile..
The hockey stick or angled profile would achieve the same..

The original profile has the inner flange to achieve a slight stand off...again to protect the edge and hide the wavy edge..
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

Any news...I have none yet!
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

MarkFer
SSVC Member
SSVC Member
Posts: 769
Joined: Wed May 14, 2008 12:53 pm
Location: Hampshire

Re: Dormobile interior edge trim - where to get?

Post by MarkFer »

Nope, nothing to show for several hours searching Graham!

Once I get to that part of my interior build I'll probably machine up edge trim in oak.

Although I do wonder whether it is worth finding out how much it would cost to get something custom-extruded. If enough of us want a set it may be worth looking into. If I had a small section I'd look into it but I haven't anything.

Mark

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

I have a full set..! BUT..
Even if extruded.. the curved end pieces would be a challenge to bend.
I also thought of having a tool made and extruding a minimum length...
Maybe I will get a quote!
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

dottie the bus
Registered user
Posts: 1146
Joined: Wed Jan 07, 2004 3:56 pm
Location: Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by dottie the bus »

I need the rear piece if anybody has any? Or ideas for alternatives.
BBBBBrrrrrrrrrmmmmmmmmmm!!!!!!!!!!!!
Rev Heads!!!!!!!!
http://i48.photobucket.com/albums/f240/ ... G_0524.jpg

type21f
SSVC Member
SSVC Member
Posts: 15187
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Dormobile interior edge trim - where to get?

Post by type21f »

Large Gentlux? You do not have!
Oh no! Bullsh*t Warning. It is Emiliano Costellano again.. I thought you had died of Aids? Or was your sob story that your dad was dying of Aids?
Have I been scammed again.. Hi to you Hojoo... or is it Hobo? Trying to get your own back?

Delete his posts he is posting phishing links..
1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

Post Reply