003 autobox

If it's part of a bus for sale then post it here.
Please put buses for sale in the "Buses for Sale" section.
When something has sold please mark it AS *** SOLD ***
Post Reply
Scousey12
Registered user
Posts: 80
Joined: Wed Aug 24, 2016 8:44 pm

003 autobox

Post by Scousey12 »

Selling a type 3 003 autobox. Ideal for a type 4 engine and then into a split.
It is the autobox complete with final drive and torque convertor.
No driveshafts or flexiplate.
In good order.
£1000 ono

User avatar
susta
SSVC Member
SSVC Member
Posts: 363
Joined: Tue Dec 10, 2013 10:26 pm
Location: sutton

Re: 003 autobox

Post by susta »

So no Flexiplate!!

scottish splitty
SSVC Member
SSVC Member
Posts: 461
Joined: Sun Oct 08, 2006 4:39 pm
Location: stirling scotland

Re: 003 autobox

Post by scottish splitty »

Hi
Interested in your auto gearbox,could you confirm you are selling the automatic gearbox and torque converter only for £1000.
Are the flexi plates and driveshafts available at extra cost (if so how much)or are they readily available ?
I'm assuming this gearbox been overhauled if so was it all new internals,clutches,seals etc,also would there be a warranty with this gearbox.
Thanks in advance
Paul

Scousey12
Registered user
Posts: 80
Joined: Wed Aug 24, 2016 8:44 pm

Re: 003 autobox

Post by Scousey12 »

susta wrote:
Sat Aug 12, 2017 5:21 pm
So no Flexiplate!!
Correct !! So annoying. The person who removed the engine probably had no idea. Probably hanging on his garage wall !!

Scousey12
Registered user
Posts: 80
Joined: Wed Aug 24, 2016 8:44 pm

Re: 003 autobox

Post by Scousey12 »

scottish splitty wrote:
Sat Aug 12, 2017 8:14 pm
Hi
Interested in your auto gearbox,could you confirm you are selling the automatic gearbox and torque converter only for £1000.
Are the flexi plates and driveshafts available at extra cost (if so how much)or are they readily available ?
I'm assuming this gearbox been overhauled if so was it all new internals,clutches,seals etc,also would there be a warranty with this gearbox.
Thanks in advance
Paul
Hi Paul.
You are correct. Re the driveshafts they are standard driveshafts from a type 3 or type 2 from a 3 rib and up gearbox. Re the flexiplate you will have to search for either new or used. Im not sure if a type 25 could be altered or not. You will need to research. The gearbox has not been overhauled there is no warranty. I can get the box overhauled with a receipt and warranty circa £300. I myself recently bought a 6 rib manual box for £800 and spent another £300 on a rebuild myself.
I hope ive answered ll your questions.
Regards
Darren

User avatar
susta
SSVC Member
SSVC Member
Posts: 363
Joined: Tue Dec 10, 2013 10:26 pm
Location: sutton

Re: 003 autobox

Post by susta »

The drive shafts are not, they are specific to a Auto Box. they are offset so different lengths that is why you had spacers

Scousey12
Registered user
Posts: 80
Joined: Wed Aug 24, 2016 8:44 pm

Re: 003 autobox

Post by Scousey12 »

Ahhh yes though the spacers can be made to suit your individual application. I very much doubt the driveshafts are offset !!! They may be different lengths. Do you know where there is a set available as they would be very handy.

Scousey12
Registered user
Posts: 80
Joined: Wed Aug 24, 2016 8:44 pm

Re: 003 autobox

Post by Scousey12 »

susta wrote:
Sat Aug 12, 2017 5:21 pm
So no Flexiplate!!
Maybe try Volkszone..see if anyone has one..

vwsplitbus
SSVC Member
SSVC Member
Posts: 1665
Joined: Mon Jun 02, 2008 6:21 pm
Location: mild mild west

Re: 003 autobox

Post by vwsplitbus »

I have type 3 driveshafts and endplates but from a manual gearbox car IRS.
1953 21A Barndoor DK
1962 RHD Ragtop
1962 Lambretta ser3 LI125

I'm Down! R U? SBS #20
Image

Image

Post Reply