gerson waiting times

Don't disrupt threads on the main boards - get it all out of your system here. Think of it as 'playtime'.
Post Reply
craig_rose
SSVC Member
SSVC Member
Posts: 402
Joined: Sat Feb 01, 2014 6:51 pm
Location: sunny slough

gerson waiting times

Post by craig_rose »

Right I'm not one to moan but after waiting ova 6 months for a pair of gerson dog legs for my 51 after emailing him before I ordered and he assured me 2 months tops, to say I'm ...... off is a understatement, it had stalled my project and I couldn't get it done for the vowo show and I was that miffed that I'm struggling to get back in to it!
Time to get the welder out again

User avatar
vwJim
SSVC Committee Member
SSVC Committee Member
Posts: 20038
Joined: Thu Apr 24, 2003 6:05 pm
Location: under a bus in Hampshire...
Contact:

Re: gerson waiting times

Post by vwJim »

Just get them from Autocraft, they'll be better panels anyway...
Supplying quality in house designed items plus parts from SyncLink, Kennedy Clutches, & CB Performance. Also fitting service including modifications & mechanical upgrades.

craig_rose
SSVC Member
SSVC Member
Posts: 402
Joined: Sat Feb 01, 2014 6:51 pm
Location: sunny slough

Re: gerson waiting times

Post by craig_rose »

They prob will be Jim but my 51 has the early style which are slightly different and I don't like the thought of cutting up a pair of £700 doglegs
Time to get the welder out again

User avatar
vwJim
SSVC Committee Member
SSVC Committee Member
Posts: 20038
Joined: Thu Apr 24, 2003 6:05 pm
Location: under a bus in Hampshire...
Contact:

Re: gerson waiting times

Post by vwJim »

Have you asked if they'd do a set? I think their current BD arches only came about because someone asked them.
Supplying quality in house designed items plus parts from SyncLink, Kennedy Clutches, & CB Performance. Also fitting service including modifications & mechanical upgrades.

craig_rose
SSVC Member
SSVC Member
Posts: 402
Joined: Sat Feb 01, 2014 6:51 pm
Location: sunny slough

Re: gerson waiting times

Post by craig_rose »

Good point Jim i will ring them TMZ :)
Time to get the welder out again

Post Reply