Garage door

This section is for general discussion related to VWs, and air-cooled bits ‘n bats.
Post Reply
User avatar
Mr Apollo
Registered user
Posts: 16
Joined: Mon Sep 11, 2017 10:24 am

Garage door

Post by Mr Apollo »

Hi, I'm looking for some advice on garage doors. I need to get a bit more head hight when my garage door is open. I have a conventional up and over metal door, which takes about 8cm from the top of the door frame when open. I need those 8cm to fit a bus shaped object through. I've looked at sectional doors that could give me full clearance through the door, but the ones I've seen seem to need more internal head height than I have. The door opening height is 210cm with only 21cm on the inside from the top of the opening to the ceiling. Swing out doors are an option, but will take some of the limited width I have. Any thoughts? Thanks

User avatar
vwJim
SSVC Committee Member
SSVC Committee Member
Posts: 20110
Joined: Thu Apr 24, 2003 6:05 pm
Location: under a bus in Hampshire...
Contact:

Re: Garage door

Post by vwJim »

Roller shutter doors do require some head room, but varies greatly between manufacturers.

Swing out doors are good, except on windy days.
Supplying quality in house designed items plus parts from SyncLink, Kennedy Clutches, & CB Performance. Also fitting service including modifications & mechanical upgrades.

User avatar
Dougie
SSVC Committee Member
SSVC Committee Member
Posts: 908
Joined: Tue Feb 21, 2006 8:31 am
Location: Redditch

Re: Garage door

Post by Dougie »

Hard to say without seeing the set up you have now. Would it be possible to fit a frame to the face of the existing opening allowing you to fit swing doors without taking anything off the width? How about a sliding or concertina door that goes to one side?
SSVC Club President
SSVC Committee - Membership Secretary

JonnyCJ
SSVC Member
SSVC Member
Posts: 3072
Joined: Thu Mar 14, 2013 6:50 pm
Location: Heswall

Re: Garage door

Post by JonnyCJ »

Dropped spindles ?

User avatar
DOUGAL
SSVC Member
SSVC Member
Posts: 1448
Joined: Thu Apr 06, 2006 3:13 pm
Location: Oxford

Re: Garage door

Post by DOUGAL »

I took the up and over door and all the bits off and put some big hinges on the door.
My garage door is now hinged to give me the headroom for my stock height bus.

Cheers,
Gertjan
Interested in 1/4 light/sliding window locks? Please PM me.
Available colours: black, blue, red, yellow, white, grey, green and purple
Link to forum post

User avatar
Mr Apollo
Registered user
Posts: 16
Joined: Mon Sep 11, 2017 10:24 am

Re: Garage door

Post by Mr Apollo »

Thanks for the feedback. I like Dougal's idea, If I can't find a suitable sectional/roller type door, that could be a good option.

ted698
SSVC Member
SSVC Member
Posts: 1449
Joined: Mon May 13, 2013 6:12 pm
Location: Bridgnorth, Shropshire.

Re: Garage door

Post by ted698 »

JonnyCJ wrote:
Wed Feb 13, 2019 9:54 am
Dropped spindles ?
Hahahahaha!

I managed to move my up n over door UP in the frame - as it had extra bits overhead to pack out & fit the frame from the joists/brickwork - so I removed the overhead bits and moved the whole frame up - I had to add a bit to the bottom of the door, but when its all painted you can't tell.
I only raised it by about 2" but it was enough.

JonnyCJ
SSVC Member
SSVC Member
Posts: 3072
Joined: Thu Mar 14, 2013 6:50 pm
Location: Heswall

Re: Garage door

Post by JonnyCJ »

Dropped spindles are way cooler and give 3.5” 😎🤪

User avatar
Mr Apollo
Registered user
Posts: 16
Joined: Mon Sep 11, 2017 10:24 am

Re: Garage door

Post by Mr Apollo »

Mrs Apollo suggested letting the air out the tyres...

Glenn Yale
SSVC Member
SSVC Member
Posts: 79
Joined: Tue Sep 09, 2014 9:14 pm
Location: Tamworth.

Re: Garage door

Post by Glenn Yale »

We've got a sectional door which is fitted with a low headroom kit. What this is is a set of extra runners that rollers of the top panel sit in. It's a bit hard to explain, I could take a couple of pic's if you wanted.

User avatar
Mr Apollo
Registered user
Posts: 16
Joined: Mon Sep 11, 2017 10:24 am

Re: Garage door

Post by Mr Apollo »

Glenn Yale wrote:
Sat Feb 23, 2019 9:13 am
We've got a sectional door which is fitted with a low headroom kit. What this is is a set of extra runners that rollers of the top panel sit in. It's a bit hard to explain, I could take a couple of pic's if you wanted.
Hi, can I ask what make of door you have, or from whom you got it? I've found one that requires much less headroom, if you don't go for the motorised opener, but it still needs a smidge too much, maybe the low headroom kit is the way to go. Thanks

Glenn Yale
SSVC Member
SSVC Member
Posts: 79
Joined: Tue Sep 09, 2014 9:14 pm
Location: Tamworth.

Re: Garage door

Post by Glenn Yale »

It's a Hormann, supplied by a local company as it was an insurance claim. My stock height bus went in no problem when I bought it.

User avatar
Mr Apollo
Registered user
Posts: 16
Joined: Mon Sep 11, 2017 10:24 am

Re: Garage door

Post by Mr Apollo »

Thanks.

Post Reply