The Split Screen Van Club

Done a bit more today, quick hour tidying up wheel well work and test for n/a pillar. Looks ok. Then new sand blaster decides to blow out the side of. All valve 🤦🏻‍♂️ Tomorrow will be a good day as long as the mrs allows it. CD63255B-2852-4A76-8EFC-03F3C34DD816.jpeg 7018F9C1-44B1-4161-BA09-A296CBE1D...

Spot welded the inner wheel tub in today and repaired the lower section on the passenger side one.
Will get pics tomorrow.
Hopefully make a start on the other pillar the too and get started on lining the door up

Bit gutted as I bought the complete inner front frame to make life easier and speed up the job. This didn’t happen as took ages trying to line up doors only to find the panel had been made wrong 🤦🏻‍♂️😟 Good job I cut it up tho, as inside it was already rusting! No treatment in there at all!! Be care...

Done a bit more during lockdown. Still working so fitting a bit in on the off days. Hope everyone is ok during this. E270C546-E8D4-4600-A8F3-44AE8CBDC6B7.jpeg 198868D7-1BDC-400B-B065-C8D85FEE24FD.jpeg DD58A208-46A2-4703-B01D-3E8222F6E892.jpeg 209CBF90-3457-453C-9330-81B60CD6F9F6.jpeg EC694204-39F9-4...

Cheers! I have a list, it’s getting smaller very slowly too.
Chassis is done, so it’s onto the fun stuff now. Thinking of getting it blasted and epoxied before going further.

Very nice! Would love to be at that point, but seems a long way to go on mine

Cut the long side off today only to find a battered wheel tub . A bit of heat and hammer n dolly action and it’s looking ok

916603FF-606B-4704-BD86-1D95AC6C18DF.jpeg 7D10C1CD-15DB-42EB-9D5F-936BC2716B01.jpeg 80D6918F-5172-4E80-819B-5DFA3DD907E8.jpeg 7593B879-C877-4106-8D0C-BEF45D2CB700.jpeg E7D1D166-EE7C-4E8F-8CD2-10563E7EC678.jpeg F1AB2D69-D5B6-4FE3-B642-2E9BB625B269.jpeg BAD798C3-24BE-4B41-847E-EFE362E27363.jpeg 6BFF5...

Welded a new piece on the n/s seat back today and got the front top hat sitting in the right place. Hopefully get that and a few other bits welded in tomorrow.

Looks amazing. Love your work!

41FA9C2C-276C-4A7D-BBCB-10865BAAEF50.jpeg 5D3D51C8-31C4-4588-BE9A-FFA535276DF5.jpeg 6E14DFD0-306E-4B88-8F2D-8DE7859E3F0A.jpeg 4DDB8260-7BB7-472B-9FD0-60D075231F43.jpeg A2F939F1-A480-464B-899F-3C22AB994E2F.jpeg 3A1C8276-152A-4530-A2AB-3895228CE719.jpeg Yesterday was a good day! Spot welder arrived a...

Made a piece for the walkthrough seat back and centre before fitting the top hat.
All going good until the gas decided to run out

Wow! Amazing work fair play.
Do you know what length of cable guides and shift rod tube you had sticking out when welded? Mine were cut when I got it and not sure how much to leave on new ones I’m fitting?

Great thread, fair play

5858C1EE-2F07-4AF6-AE47-F0A1CEF10E4A.jpeg DB4160E9-939D-46D9-AFD4-BD7D3FC9B478.jpeg D41D4E5B-F6B9-47BB-A7E2-AF0E60BD1571.jpeg 58C4EF31-AE25-43F9-9B6A-D05E69E6147E.jpeg 81414FD4-6FB2-49C0-AFD8-44EE6AE07AC6.jpeg Just a little plate grafted in today, and a trail fit of b post with cargo door on. Can f...