Search found 363 matches

by ricvw
Thu Jul 02, 2020 11:24 am
Forum: Bus Parts For Sale
Topic: Sundial shell material green/turquoise
Replies: 0
Views: 141

Sundial shell material green/turquoise

Got some vinyl left which is very close to the original style, the original was pin pricked around the shells there 4.2 meters and it’s 1.38 wide ive put some pics of my old bus to show how it looks. £120
by ricvw
Thu Apr 23, 2020 7:06 am
Forum: Wanted
Topic: WANTED Late front trailing arms
Replies: 1
Views: 194

WANTED Late front trailing arms

Hi I’m after a set of late front arms 63> if any one has a set they want to sell let me know thanks Ric.
by ricvw
Tue Oct 22, 2019 6:01 pm
Forum: Technical
Topic: Porsche brakes for early spindles options.
Replies: 0
Views: 331

Porsche brakes for early spindles options.

Currently on csp 205 15 inch brakes want to go to 5\130 can you buy just the hubs of csp? Or can you get the adaptors for Porsche brake for early spindles? I can only find them for the latter spindles.
by ricvw
Sun Mar 03, 2019 8:53 pm
Forum: Technical
Topic: Help captive plate on B post dropped off
Replies: 1
Views: 417

Help captive plate on B post dropped off

Been trying to gap my doors today and the captive plate has dropped down, is it open surgery to get it out, or dose some one have a super tip. It's the bottom hinge next to the front wheel of it makes any difference.
by ricvw
Thu Feb 28, 2019 11:02 am
Forum: Technical
Topic: What should I set the timeiing with a English TCS-10 cam
Replies: 11
Views: 1296

Re: What should I set the timeiing with a English TCS-10 cam

It was on a 009 with cb computer tune to hei coil
by ricvw
Wed Feb 27, 2019 7:55 pm
Forum: Technical
Topic: What should I set the timeiing with a English TCS-10 cam
Replies: 11
Views: 1296

Re: What should I set the timeiing with a English TCS-10 cam

It was the first cb with the box with the dials on
by ricvw
Wed Feb 27, 2019 7:20 pm
Forum: Technical
Topic: What should I set the timeiing with a English TCS-10 cam
Replies: 11
Views: 1296

Re: What should I set the timeiing with a English TCS-10 cam

It was turbo but it was not running properly so I have put it back on carbs, I’m going to try the turbo and injection back on after the summer just want to use it this summer then will try the efi turbo latter on I set the timeing at 30 at 3000rpm and it’s a lot better, thanks
by ricvw
Wed Feb 20, 2019 6:11 pm
Forum: Technical
Topic: What should I set the timeiing with a English TCS-10 cam
Replies: 11
Views: 1296

Re: What should I set the timeiing with a English TCS-10 cam

Thanks, so it dose not matter about tick over just at 3000rpm? Is the 28_30 just the max advance?
by ricvw
Mon Feb 18, 2019 8:51 pm
Forum: Technical
Topic: What should I set the timeiing with a English TCS-10 cam
Replies: 11
Views: 1296

What should I set the timeiing with a English TCS-10 cam

The engine was originally built with efi turbo but was running very rough, and I didn't know if it was the efi or the engine so have tried it with a set of 44idfs and it runs ok I'm just want to know what to set the timeing to cheers ric.
by ricvw
Thu Oct 18, 2018 4:17 pm
Forum: Technical
Topic: iRS wheel bearings new still got play
Replies: 3
Views: 585

Re: iRS wheel bearings new still got play

Don’t know who’s IRS kit it is but it’s a type1 box and late bay bearing carrier. Stripped it down tonight it seems to be the outer bearing. when you take the drum off you can see the movement, they were Meyle bearings, has anybody got a recommendation on good quality bearings?
by ricvw
Wed Oct 17, 2018 5:01 pm
Forum: Technical
Topic: iRS wheel bearings new still got play
Replies: 3
Views: 585

iRS wheel bearings new still got play

Just got a new bus on irs I'm just going throw it and there was a lot of play in the rear bearings so I have replaced them, there the latter bearing hubs with wide 5 drums and the inner 7mm spacer at first I thought I had not tightened them enough so rechecked and torque, and still got play, when th...
by ricvw
Thu Aug 16, 2018 6:20 pm
Forum: Technical
Topic: Recommendations on ECU for a turbo engine
Replies: 3
Views: 757

Re: Recommendations on ECU for a turbo engine

Dose any one have a recommendation on a rolling road near Manchester
by ricvw
Wed Aug 15, 2018 8:52 am
Forum: Technical
Topic: Recommendations on ECU for a turbo engine
Replies: 3
Views: 757

Recommendations on ECU for a turbo engine

If you were going to fit efi turbo to 2.1 engine which would you fit? I would be after something Which was as close to fit and set up and forget if there is such a thing, the engine currently has a old CB efi with dials in the cab which are glued in place any recommendations greatly revived.
by ricvw
Sun Aug 12, 2018 9:35 am
Forum: Bus Parts For Sale
Topic: SWAP a 4” narrowed beam for 2”
Replies: 0
Views: 368

SWAP a 4” narrowed beam for 2”

Hi is any one after going narrower I have a like new 4inch Slamworks beam it’s had very little use if you have a 2inch narrowed beam and want to do a trade let me know ric 079717421472
by ricvw
Thu Jul 19, 2018 3:37 pm
Forum: Buses For Sale
Topic: SOLD
Replies: 9
Views: 2182

Re: 1964 sundial walk through

Pm me your email and I will send them over