Search found 22 matches
- Wed May 15, 2019 9:56 pm
- Forum: Technical
- Topic: Sump oil temperature sender
- Replies: 23
- Views: 3087
I did get a few spare blanking plates cut when I did mine, they are from 5mm stainless with an 8.5mm hole in the middle, I could tap them M10 if required. PM me if you want one, I'll just need to cover the postage and packing cost Cheers IMG_2787.JPG I know it's a few years ago but do you by any ch...
Original speedo fitted, new cable but no reading when driving. Removed cable from hub, connected electric drill to test and needle moves to about 30mph, re-connect to hub no reading when driving, though odometer does move. Any ideas?
Help, really struggling to get gear selection after trying all ways for couple of weeks on and off. Berg shifter, new rods and bushes, IRS gearbox with new nosecone, will start to make progress tighten bolts try again and lost selection, usually trouble with 2nd and 4th. Any advice appreciated.
After checking all possibilities of a fuel issue including float heights, adjusting mixture screws and checking fuel lines engine is now running perfectly, not sure what the actual cause was but it's running great now. Thanks again for the suggestions.
Filter King was supplied fitted, also has an arrow on it for direction of flow, fittings are both horizontal. Backfire sounded as though from exhaust, will try removing filter and fuel cap. Thanks for input guys.