The Split Screen Van Club

I'd speak to Bromosgrove Autotrimmers.

http://www.bromsgroveautotrim.com/

Rob

I have this diagram of a 78 top locker if it is of any help?

David On the cutting out it is back to basics, set valve gaps, check, clean & gap plugs, check, clean & gap points, check & clean all ignition components, leads, cap, rotor arm, time the ignition, set the carbs, balance if twin carbs, check the timing, sorted. A good website to read http://www.vw-re...

Unfortunately we can't see any of your pictures, maybe that's why there are no comments?

Nice to have this thread resurrected, three from our trip to Germany in the summer

As Jim says pre-fill the cooler before you attach the pipes, if you’re running an external filter do the same with that, then if it’s a standard sump it’s 2.5 litres give or take to fill the engine, but should be fine to start it up and check the level, if it’s a stock dipstick it’s 0.5 litres betwe...

danny13 wrote: ↑

Thu Oct 24, 2019 1:26 pm

Rusty Mangels any good for you?
20191020_160541.jpg

Maybe, what are you after for them?

PeterJ wrote: ↑

Sat Oct 19, 2019 4:45 pm

Hi,

It's simply, DISTRIBUTORS.

Thanks Peter

type21f wrote: ↑

Thu Oct 17, 2019 7:35 pm

For both..

Obvious really, thanks G for solving the puzzle SLUMBERWAGEN!

PeterJ wrote: ↑

Mon Mar 11, 2019 5:13 pm

Hi,

Another photo for you. I think it's a little better in some areas but I'd have to work on the lighting to hope to get it any better. So I'm afraid that's it for now.

Peter, what does it say under the VW badge? Can’t read it.

Thanks

Dot That extension is to allow an additional sender (pressure or temp) to be fitted, looks like it is blanked off. Have you grounded the wire in the engine bay? The bulb should light, if not it is a wiring issue which you can test by running a temporary wire outside the bus between the sender and th...

Great ad, nice car but could you add a price please?

Thanks

tman wrote: ↑

Thu Sep 26, 2019 9:39 pm

I need a panel from Richard (8 8US) bringing down from Wolverhampton (if he's still got it for sale).

cheers,

Still for sale! Can meet up and hand over if anyone is travelling down from the Midlands or near?

The marks on the pulley wheel relate to the position of the pistons and valves, so TDC of the piston with valves closed. The distributor drive has no effect on where the pistons or valves sit, so won't affect it at all. Timing is still referenced to TDC. The drive being out of line will only give yo...

victorvant4 wrote: ↑

Sun Sep 22, 2019 5:08 pm

Hi, i´m interested in the awning. is it still for sale?
Thank you

victorvant4@yahoo.es

Sorry sold at the weekend and collected today.