Devon Interior Plan?

shaun · **Joined:** Sat Nov 27, 2010 11:26 pm **Posts:** 50

big_al wrote:

Interesting you have the same pump setup as me, i thought it was a later add on but your cupboard has the same blanking door too.

I think there should be some brackets on the right cargo door to support the cooker lid that slides off the unit.

Also a small wooden flap that drops down between the two seats, but looks like you have a modified piece to fit.

What's the black frame on the cooker unit? a slide? it would of swung out on a hinge originally.

nice

Yes the black frame is a slide. it pulls down from the side of the cooker and then the whole thing slides out on it. No brackets on cargo doors though. Also I'm not sure what the 2 bits are here...?

shaun · **Joined:** Sat Nov 27, 2010 11:26 pm **Posts:** 50

nexus 7 wrote:

nice......Ahhhhhhhhhhh Devon Porn!

The only things I can see missing is the slidey top to the easicool cabinet...and the cushion on top of that...

The crockery cupboard leather straps for holding the melaware crockery are missing (that is what the male poppers are for)
Pictures on Big Al's page and Spencer's pages

and the Melaware...

Oh and please can we have the coat hanger profile...

Oak ware has been varnished and had some pieces added (piece above easicool and door? in mahogany colour)
.......nice

Is this not the slidey top on the easicool? or is it a home made one? it has the brackets that fit on the sliders. No cushion though...

Also not sure what you mean by coat hanger profile? if you can elaborate I'll be glad to help out.

Shaun.

nexus 7 · **Posted:** Fri Oct 21, 2011 5:44 am

Yes that is the slidey thing!
sorry...
The coathangers are often missing...many do not have these...

I would like a pencil silhouette to programme the laser cutter!
All looks to be there..
The white piece is part of the bed frame..I believe!

shaun · **Joined:** Sat Nov 27, 2010 11:26 pm **Posts:** 50

nexus 7 wrote:

Yes that is the slidey thing!
sorry...
The coathangers are often missing...many do not have these...

I would like a pencil silhouette to programme the laser cutter!
All looks to be there..
The white piece is part of the bed frame..I believe!

No problem mate,

Do you want me to send you a template? if so then send me a pm with your details and i'll get on it.

Cheers,

Shaun.

big_al · **Posted:** Fri Oct 21, 2011 11:31 am

The 2 bits of wood you mention are I think homemade, the leg metalwork is original but should be on a smaller piece of wood. Like this

http://s45.photobucket.com/albums/f62/A ... n%20table/

You can see some excellent pictures here, from nhsjohn. The piece sort of between the 2 front seats would have the metalwork. and note the flap down bit under the table.

viewtopic.php?f=46&t=78168

But guess what you have works fine, depends how nerdy you want to get

Devon Interior Plan?

Who is online