Not time to join! Engine builder needed!

bu54ter · **Joined:** Wed Apr 16, 2008 3:57 pm **Posts:** 649

Hey guys,

Well after 8 months of solid work in the garage getting the bws ready, my engine should be here on friday or sat! Can't frigging wait!! Went for a 2110 in the end, FK8 with 1:4 followers, twin weber 44's, cb 044 heads, 40 & 37.5mm stainless springs, stage 1 clutch, and a nice stainless tuck away. Got a rancho pro street box tucked up in there too 3.88 r&p and the taller 4th.

What i want to know is how long do i have to take it easy for? and is there anywhere good in the Northwest for rolling road that people have used once she's run in, so i can get her set up tiptop!
Cheers
Buster

pye1man · **Posted:** Wed Apr 14, 2010 4:28 pm

After you've broke the cam in changed the oil and filter you need to break the rings in, lots of steep hills and gear changes should do it. I would get it tuned and then give it some stick.
Have fun...

Andy

zippy · **Posted:** Wed Apr 14, 2010 8:58 pm

Where in the North West are ya?? I had mine done at Chatsworth Motors in Chesterfield, top bloke

jerrythegerman · **Joined:** Sun Feb 08, 2009 7:47 pm **Posts:** 327

RE performance in Bury is good, Rob Waddington at Minisport in Padiham is good too (though I always thought the dyno read a little "high") the set up was very good.

bu54ter · **Joined:** Wed Apr 16, 2008 3:57 pm **Posts:** 649

Hi guys
Been let down by plans of a 2110. I need to order a turnkey motor from some one. Suggestions please! Or if you know of any engines for sale then please let me know!

pye1man · **Posted:** Fri Apr 30, 2010 9:14 am

bu54ter wrote:

Hi guys
Been let down by plans of a 2110. I need to order a turnkey motor from some one. Suggestions please! Or if you know of any engines for sale then please let me know!

John Walket "63 ragtop" on vzi built many bus & bug performance engines
including mine of which I'm very happy with, I fitted about 4-5 years ago have ragged it on the drag strip and dont hang about on the roads either! I have covered on average 3-4K/year. Mine is a mild 2027cc and has been toatlly relaible to date! I have no worries in recommending him!

Cheers

Andy

rodney72 · **Posted:** Fri Apr 30, 2010 7:17 pm

This engine sounds the part/www.vwtype3and4club.org.uk/forum/viewtopic.php?f=8&t=4525 :twisted:

and comes with a whole fastback attatched. good luck

kevdonlon01 · **Joined:** Sun Sep 16, 2007 5:00 pm **Posts:** 5

how fast do you want to go?

built by 63ragtop as recommended above, completely turnkey

http://www.ssvc.org.uk/phpbb/viewtopic.php?f=4&t=65999

vwbuzzers · **Posted:** Mon May 17, 2010 10:42 pm

I was told about your engine problem a vicky farm and i wasn't overly shocked. Try stef at mac a John Walket they can both do you a good job.

John built the turbo in the post above now that is an engine.

delux 67 · **Posted:** Tue May 18, 2010 6:14 pm

vwbuzzers wrote:

I was told about your engine problem a vicky farm and i wasn't overly shocked. Try stef at mac a John Walket they can both do you a good job.

John built the turbo in the post above now that is an engine.

mentioned steff to buster mate and its getting the work done

vwgillybilly · **Posted:** Fri Jul 09, 2010 9:28 pm

zippy wrote:

Where in the North West are ya?? I had mine done at Chatsworth Motors in Chesterfield, top bloke

Ike the German by any chance?!

Not time to join! Engine builder needed!

Who is online